If you have been reading about Collapse temperature and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2026-05-23. Where a claim depends on a specific study, the study is described rather than over-claimed.
A freeze-dryer consists of a vacuum chamber, temperature-controlled shelves, a condenser, and a vacuum pump. Vials, ampoules, or bulk trays hold the product during the cycle. The condenser traps water vapor as ice at a temperature lower than the product. Cycle development balances shelf temperature, chamber pressure, and time. Scale-up can be difficult because heat and mass transfer change with equipment size, so process analytical tools and conservative validation are often used.
Lyophilization is a dehydration technique in which a product is frozen and the solvent is removed under reduced pressure. The low pressure allows ice to sublimate directly into vapor without passing through a bulk liquid phase. This differs from conventional drying, where heat drives evaporation and can damage heat-sensitive structures. The process is used for biological materials, pharmaceutical formulations, and some foods. Its main advantage is preservation of porous structure and rapid reconstitution.
The process usually has three stages: freezing, primary drying, and secondary drying. Freezing sets the ice crystal structure and can determine pore size in the final cake. Primary drying removes free ice by sublimation at low pressure and low shelf temperature. Secondary drying removes bound water by raising the shelf temperature, although some water may remain as part of the solid. Cycle parameters depend on formulation, fill volume, vial type, and equipment performance.
The physical chemistry of freezing influences whether a formulation forms an amorphous glass or a crystalline solid. Amorphous systems can collapse if product temperature rises above the glass transition temperature of the freeze concentrate. Crystalline systems may show eutectic melting, where ice and solute melt together at a fixed temperature. Formulators add bulking agents, lyoprotectants, and buffers to preserve structure and biological activity. The optimum cycle keeps product temperature below critical thresholds during primary drying while allowing efficient sublimation.
Lyophilization is a dehydration process that removes water from a frozen material by sublimation under low pressure. The material is first frozen so that water becomes ice; then the surrounding pressure is lowered below the vapor pressure of ice. Heat is applied gently so ice changes directly to vapor without passing through a bulk liquid phase. The vapor is collected on a cold condenser, leaving a dry porous matrix. This process differs from simple evaporation because the material remains frozen during the main drying stage.
| Property | Value | Notes |
|---|---|---|
| Common synonyms | freeze-drying, lyophilisation, cryodesiccation | Lyophilization is common in pharmaceutical literature. |
| Typical chamber pressure during primary drying | 0.05–0.5 mbar (5–50 Pa) | Must remain below the triple point of water. |
| Typical shelf temperature during freezing | −40 to −20 °C | Lower temperatures may be used for eutectic systems. |
| Typical residual moisture after secondary drying | 0.5–3% w/w | Product-dependent; low moisture improves stability but can cause over-drying. |
| Typical analytical method for residual moisture | Karl Fischer titration or loss on drying | Thermogravimetric methods are also used. |
Freeze-drying is used for materials whose activity or structure depends on low temperature and low water content. Examples include certain biologics, diagnostic reagents, starter cultures, coffee, and porous inorganic precursors. The dried product forms a cake whose porosity aids rapid wetting and dissolution. Main drawbacks are high energy use, long cycle times, and sensitivity to formulation and equipment variation. Questions remain about how freezing rates and ice morphology affect batch uniformity, especially when moving from laboratory to production scale.
Lyophilization, also called freeze-drying, is a dehydration process in which a solvent, usually water, is frozen and then removed by sublimation under reduced pressure. The method preserves heat-sensitive materials that would degrade in conventional drying. Large-scale use grew during the mid-twentieth century for blood plasma and antibiotics, and it later expanded to vaccines, enzymes, foods, and advanced materials. The process produces a dry, porous solid that usually reconstitutes rapidly. It is distinct from simple evaporation because the solvent bypasses the liquid phase during primary removal.
A formulation often contains excipients that protect the active ingredient during freezing and drying. Bulking agents provide structure, while lyoprotectants stabilize sensitive molecules. The freezing step can produce ice crystals whose size and distribution affect the drying rate, and cycle design includes freezing, annealing, and drying phases. If the product temperature rises above a critical value, the cake may collapse or lose its porous structure. Successful lyophilization therefore depends on the interaction between formulation, equipment, and cycle design.
Lyophilization is a dehydration process that removes water from a frozen material by sublimation under low pressure. The material is first frozen to convert liquid water into ice. Next, the pressure is reduced below the triple point of water so that ice changes directly into vapor without passing through a liquid phase. This step is called primary drying. The result is a porous solid or cake that retains the original shape of the frozen solution.
The low pressure used during drying allows water vapor to move from the ice surface to a cold condenser. Energy supplied as heat drives sublimation but must stay below the collapse temperature of the frozen matrix. If the product becomes too warm, the frozen structure may soften or melt, reducing pore formation and slowing drying. Formulations often include bulking agents, stabilizers, or buffers to support a rigid cake. The final moisture content depends on formulation, freezing rate, and the length of secondary drying.
Freeze-drying is distinct from simple evaporation and from spray drying. Evaporation removes water at temperatures above freezing, while spray drying rapidly dries droplets in a heated gas stream. Lyophilization avoids high temperatures, which can be useful for heat-sensitive materials such as proteins, vaccines, and some foods. The porous cake produced by sublimation dissolves or rehydrates more quickly than a dense dried mass. Not all materials tolerate freezing or the pH shifts that can occur as solutes concentrate during ice formation.
Lyophilization removes water from a frozen material by sublimation under reduced pressure. The process begins with freezing, which converts liquid water into ice and fixes the structure of the sample. After freezing, primary drying lowers pressure so ice changes directly to vapor without passing through a liquid phase. Secondary drying then removes bound water that remains after ice sublimation. The result is a dry, porous solid that often retains its original shape.
Paulovich is a Professor in Clinical Research, an Aven Foundation Endowed Chair, and the Director of Early Detection Initiative at the Fred Hutchinson Cancer Research Center. She was inducted to the American Society for Clinical Inviestigation in 2012. Paulovich is an expert in proteomics. Her targeted proteomics method uses multiple reaction monitoring mass spectrometry to target cancer biomarkers with ongoing clinical trials, and was named Method of the Year in 2012 by Nature Methods. She founded Precision Assays in 2016, whose rights to targeted assays were acquired by CellCarta in 2022. 2014 Life Science Innovation Northwest Woman to Watch in Life Science Award 2015 Human Proteome Organization (HUPO) Distinguished Achievement in Proteomic Sciences Award Identification and use of biomarkers for detection and quantification of the level of radiation exposure in a biological sample (2011) US 20130052668 A1 Compositions and methods for reliably detecting and/or measuring the amount of a modified target protein in a sample (2011) US 20130052669 A1
Vaginal films are soluble, thin sheets of medication that are inserted into the vagina where they dissolve and release the substances. Typical uses include delivery of contraceptive substances or antibiotics for infections. These films are inserted by simply pushing them into the vagina with one’s fingers. There they dissolve quickly upon interaction with natural vaginal fluids. Bioadhesives are substances that naturally stick to live tissue. Currently, studies are being done on bioadhesives adhering to cervical mucous membranes to allow for an extended release period. The drug would be released with mucus to create a localized treatment with high effectiveness. This is anticipated to be highly useful for treatment of cervical cancer. Bioadhesives can come in multiple forms, such as films, tablets, or gels. The appeal of bioadhesives is that they take advantage of the mucous environment surrounding the cervix and utilize it to benefit the drug delivery mechanism.
AAA proteins are not restricted to eukaryotes. Prokaryotes have AAA which combine chaperone with proteolytic activity, for example in ClpAPS complex, which mediates protein degradation and recognition in E. coli. The basic recognition of proteins by AAAs is thought to occur through unfolded protein domains in the substrate protein. In HslU, a bacterial ClpX/ClpY homologue of the HSP100 family of AAA proteins, the N- and C-terminal subdomains move towards each other when nucleotides are bound and hydrolysed. The terminal domains are most distant in the nucleotide-free state and closest in the ADP-bound state. Thereby the opening of the central cavity is affected. AAA proteins are involved in protein degradation, membrane fusion, DNA replication, microtubule dynamics, intracellular transport, transcriptional activation, protein refolding, disassembly of protein complexes and protein aggregates.
The cell-mediated response to the virus and to vectors is poorly characterised, and has been largely ignored in the literature as recently as 2005. Clinical trials using an AAV2-based vector to treat haemophilia B seem to indicate that targeted destruction of transduced cells may be occurring. Combined with data that shows that CD8+ T-cells can recognise elements of the AAV capsid in vitro, it appears that there may be a cytotoxic T lymphocyte response to AAV vectors. Cytotoxic responses would imply the involvement of CD4+ T helper cells in the response to AAV and in vitro data from human studies suggests that the virus may indeed induce such responses, including both Th1 and Th2 memory responses. A number of candidate T cell stimulating epitopes have been identified within the AAV capsid protein VP1, which may be attractive targets for modification of the capsid if the virus is to be used as a vector for gene therapy. There are several steps in the AAV infection cycle, from infecting a cell to producing new infectious particles:
Sources: en.wikipedia.org
An aviation accident is an event during aircraft operation that results in serious injury, death, or significant destruction. An aviation incident is any operating event that compromises safety but does not escalate into an aviation accident. Preventing both accidents and incidents is the primary goal of aviation safety. The most common causes of these accidents and incidents are technical or mechanical failures of the aircraft and pilot error. Adverse weather conditions, including turbulence, thunderstorms, icing, and low visibility, have also historically been major contributing factors in aviation accidents and incidents worldwide. Since civil aviation became widespread in the mid-20th century, hundreds of incidents have occurred every year, with most being minor and non-fatal.
Clear Lake Audiotorium is a six-track promo EP by De La Soul given out to A-list DJs in 1994, the catalog number is TB 1093 (Side A, "THIS SIDE" is TB 1093 A and Side B "OTHER SIDE" is TB 1093 B). It was composed of four tracks from the group's album Buhloone Mindstate and two non-album tracks—"Sh.Fe.Mc's" featuring A Tribe Called Quest, and "Stix & Stonz" featuring The Fearless Four, Grandmaster Caz, and Prince Whipper Whip. With only 500 copies pressed (vinyl and CD), Clear Lake Audiotorium remains one of the most sought-after De La Soul releases to date. Originally pressed on clear/light green vinyl and packaged in a clear plastic sleeve, the record has since been bootlegged on black vinyl. On March 7, 2025, exactly 31 years after its original release, the EP was released officially on streaming releases, alongside a limited physical re-release.
The latest development in the medical treatment of acromegaly is the use of growth hormone receptor antagonists. The only available member of this family is pegvisomant (Somavert). By blocking the action of the endogenous growth hormone molecules, this compound is able to control the disease activity of acromegaly in virtually everyone with acromegaly. Pegvisomant has to be administered subcutaneously by daily injections. Combinations of long-acting somatostatin analogues and weekly injections of pegvisomant seem to be equally effective as daily injections of pegvisomant. Paltusotine (Palsonify) was approved for medical use in the United States in September 2025.
The carbon atom next to the carboxyl group is called the α–carbon. In proteinogenic amino acids, it bears the amine and the R group or side chain specific to each amino acid, as well as a hydrogen atom. With the exception of glycine, for which the side chain is also a hydrogen atom, the α–carbon is stereogenic. All chiral proteinogenic amino acids have the L configuration, and can therefore be referred to as L-amino acids. They are "left-handed" enantiomers, which refers to the stereoisomers of the alpha carbon. A few D-amino acids ("right-handed") have been found in nature, e.g., in bacterial envelopes, as a neuromodulator (D-serine), and in some antibiotics. Rarely, D-amino acid residues are found in proteins, and are converted from the L-amino acid as a post-translational modification.
RGD and other bioactive ligands can be presented on the surface of a biomaterial in a number of different spatial arrangements, and it has been demonstrated that these arrangements have a significant impact on cell behavior. In self-assembled monolayers, it was found that adhesion and proliferation of both human umbilical vein endothelial cells (HUVECs) and human mesenchymal stem cells (MSCs) increased as a function of RGD peptide density. These studies also showed that RGD density could change integrin expression, which has been postulated to enable control of biochemical signaling pathways. Further investigation of MSCs on self-assembled monolayers showed that modulating RGD density and the affinity of RGD for αvβ3 (through use of linear and cyclized RGD) could be used to control the differentiation of MSCs. The effect of RGD presentation on cells in 3D biomaterials, which more accurately replicate the in vivo environment, has also been evaluated. In degradable polyethylene glycol hydrogels, the length of capillary-like structures formed by HUVECs was directly proportional to the density of RGD in the hydrogel. Additionally, studies in nano-patterning have shown that, whereas an increase in global RGD density increases cell adhesion strength until saturation, an increase in local (mico/nano-scale) RGD density does not follow this trend.
Sources: en.wikipedia.org
A biomaterial should perform its intended function within the living body without negatively affecting other bodily tissues and organs. In order to prevent unwanted organ and tissue interactions, biomaterials should be non-toxic. The toxicity of a biomaterial refers to the substances that are emitted from the biomaterial while in vivo. A biomaterial should not give off anything to its environment unless it is intended to do so. Nontoxicity means that biomaterial is: noncarcinogenic, nonpyrogenic, hypoallergenic, blood compatible, and noninflammatory. However, a biomaterial can be designed to include toxicity for an intended purpose. For example, application of toxic biomaterial is studied during in vivo and in vitro cancer immunotherapy testing. Toxic biomaterials offer an opportunity to manipulate and control cancer cells. One recent study states: "Advanced nanobiomaterials, including liposomes, polymers, and silica, play a vital role in the codelivery of drugs and immunomodulators. These nanobiomaterial-based delivery systems could effectively promote antitumor immune responses and simultaneously reduce toxic adverse effects." This is a prime example of how the biocompatibility of a biomaterial can be altered to produce any desired function.
study of complex formation in supramolecular systems – organized ensembles surfactants and macrocyclic ligands; study of coordination compounds of iron (III) and manganese (II) for magnetic resonance imaging; obtaining new types of hybrid organic-inorganic functional materials based on nanoscale hyperbranched structures. Results of these studies are of basic value in the area of coordination chemistry, bioinorganic chemistry, chemistry of nanomaterials, pharmaceutical chemistry. Proposed model and physio-chemical basis of self-assembly of nanoscale of hyperbranched polymers, set new approaches to understanding the mechanisms of gene transfection and targeted drug delivery.
Aerospace 9100 (AS9100) is an international standard for aerospace management systems that is a widely adopted and standardized quality management system for the aerospace sector. It was developed in March 1999 by Society of Automotive Engineers. The goal of the standard is to provide for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the aerospace industry supply chain and assembly process. The standard was designed to fit into an integrated management system. AS9100 replaces the earlier AS9000 and fully incorporates the entirety of the current version of ISO 9001, while adding requirements relating to quality and safety. Major aerospace manufacturers and suppliers worldwide require compliance with AS9100 as a condition of doing business with them.
The DLD homodimer functions as the E3 component of the pyruvate, α-ketoglutarate, α-adipate and branched-chain amino acid-dehydrogenase complexes and the glycine cleavage system, all in the mitochondrial matrix. In these complexes, DLD converts dihydrolipoic acid and NAD+ into lipoic acid and NADH. DLD also has diaphorase activity, being able to catalyze the oxidation of NADH to NAD+ by using different electron acceptors such as O2, labile ferric iron, nitric oxide, and ubiquinone. DLD is thought to have a pro-oxidant role by reducing oxygen to a superoxide or ferric to ferrous iron, which then catalyzes production of hydroxyl radicals. Diaphorase activity of DLD may have an antioxidant role through its ability to scavenge nitric oxide and to reduce ubiquinone to ubiquinol. The dihyrolipamide dehydrogenase gene is known to have multiple splice variants.
The society publishes three research journals and a review journal: the Journal of Pharmacology and Experimental Therapeutics, Drug Metabolism and Disposition, Molecular Pharmacology, and Pharmacological Reviews Starting in 2012 these publications are only offered online. The society copublishes a wholly open access journal with the British Pharmacological Society and Wiley entitled Pharmacology Research & Perspectives. ASPET also publishes a quarterly newsletter, The Pharmacologist, and, from 2001 to 2011, Molecular Interventions magazine. The society gives out several awards:
Sources: en.wikipedia.org
Yes, the terms are generally interchangeable. Lyophilization is more common in pharmaceutical and laboratory contexts, while freeze-drying appears widely in food science and general writing. Both describe removal of solvent by sublimation under vacuum after freezing.
Reduced pressure keeps the process below the triple point of water, so ice can sublimate directly to vapor. It also lowers the temperature needed for drying, which helps preserve heat-sensitive materials. Without vacuum, melting or boiling could occur instead of controlled sublimation.
The rate depends on heat transfer to the product and mass transfer of vapor through the dried layer. A cold condenser, adequate vacuum, and suitable shelf temperature all influence speed. Formulation properties such as solid content and collapse temperature also set practical limits.
The main change is sublimation, in which ice becomes water vapor without melting into liquid water. This occurs when the chamber pressure is held below the vapor pressure of ice while mild heat is supplied. The result is a dry, porous solid that retains much of its original shape.