This is a working overview of glass transition, written for readers who want more than a one-paragraph summary but less than a textbook.
Reviewed 2025-10-04. Anything still debated is marked as such rather than presented as settled.
Analytical methods for lyophilized solids must account for the low moisture content and the fragile cake. Karl Fischer titration is widely used for water content, while near-infrared spectroscopy can measure moisture non-destructively in sealed containers. X-ray diffraction and modulated differential scanning calorimetry help identify crystalline or amorphous phases. Residual solvent analysis may be needed if organic solvents were used during formulation. The combination of these methods supports batch release and long-term stability assessment.
Lyophilized products are typically stored as sealed solids in vials or syringes. Moisture ingress is a major concern because many dried cakes are hygroscopic and can lose stability when exposed to humid air. Storage temperature depends on the formulation; some products are kept refrigerated, while others are stable at room temperature. Container closure integrity and headspace moisture are often monitored. Light protection may also be required for some photosensitive materials.
Handling and storage practices aim to keep the cake intact and dry. Vials are typically stored upright at controlled temperatures, often between 2 °C and 8 °C or at -20 °C for longer-term use. Reconstitution involves adding a suitable diluent and gently mixing until the solid dissolves. Shaking or rapid injection of diluent can create foam or damage sensitive molecules. Once reconstituted, the product may require refrigeration and use within a defined period.
Residual moisture is a key quality attribute for lyophilized products. Water that remains after secondary drying can affect chemical stability, cake structure, and shelf life. Karl Fischer titration is a common method for measuring water content in the dried solid. The target range varies by product, but many biologics are dried to between 0.5% and 3% water by weight. Acceptable limits are set during development and confirmed by stability studies.
Stability studies examine how temperature, humidity, and time influence a lyophilized product. Accelerated conditions provide early information about degradation pathways, while long-term studies support shelf-life claims. The glass transition temperature of the dried formulation can indicate its physical stability, and storage above this temperature may increase molecular mobility and lead to collapse or aggregation. Container closure integrity also matters because moisture or oxygen ingress can degrade the product, so vial stoppers and seals are part of the quality system.
| Property | Value | Notes |
|---|---|---|
| Storage temperature | 2–8 °C or 20–25 °C | Depends on product stability; some require frozen storage. |
| Moisture content | 0.5–3% w/w | Higher values may reduce stability; target set per product. |
| Moisture method | Karl Fischer titration | Coulometric for low levels; volumetric for higher levels. |
| Cake appearance | Uniform, intact, no collapse | Visual inspection is qualitative and not a potency measure. |
| Reconstitution time | Seconds to several minutes | Depends on cake density, excipients, and diluent. |
Analytical methods for lyophilized materials include X-ray diffraction for crystallinity, differential scanning calorimetry for thermal transitions, and scanning electron microscopy for pore morphology. Moisture sorption analysis shows how the cake responds to humidity. These methods help distinguish amorphous from crystalline states and detect phase changes. Open questions remain about how pore structure changes during long-term storage and how best to predict collapse under varied conditions. Comparisons across studies are complicated by differences in formulation, cycle, and storage history.
Quality control for lyophilized products focuses on appearance, moisture level, reconstitution time, and structural integrity. A cake should be uniform, intact, and free of meltback or collapse. Moisture level is measured by Karl Fischer titration or thermogravimetric analysis. Reconstitution time reflects pore structure and formulation. Visual inspection and vial integrity checks detect cracks, stopper defects, or particulate matter. These checks are often performed on samples from each batch. They help confirm that the drying cycle performed as intended.
Storage stability depends on water content, oxygen exposure, and temperature. Lyophilized solids are hygroscopic and can absorb water if exposed to humid air. Vials are usually sealed under vacuum or inert gas with rubber stoppers and aluminum crimps. Storage temperatures range from room temperature to refrigerated or frozen conditions depending on the material. Stability studies track potency, moisture, and physical form over time. Accelerated conditions can reveal sensitivity but may not predict long-term behavior.
Storage conditions depend on the formulation and the intended shelf life. Many pharmaceutical and biological freeze-dried products are kept at 2–8 °C, while some stable foods and reagents tolerate room temperature. Others require −20 °C or colder to slow chemical degradation or aggregation. Protection from light and oxygen is common because oxidation can continue in the dry state. Stability studies usually monitor potency, appearance, moisture, and reconstitution time over months or years. Predictions from accelerated studies are useful but may not fully capture real-time changes.
Quality control for freeze-dried lots combines visual inspection with instrumental tests. Cake appearance, color, and shrinkage are recorded against a reference, while residual moisture is measured by Karl Fischer titration or loss on drying. Thermal analysis can reveal phase transitions and crystallization events, and X-ray diffraction distinguishes amorphous from crystalline solids. Microbiological tests and container closure integrity checks are also routine for sterile products. Analytical methods must be validated for the matrix, because excipients and low moisture can affect accuracy. Open questions include how best to predict long-term stability from short-term data.
Lyophilized solids are often hygroscopic, so handling occurs in controlled low-humidity areas or glove boxes when the material is exposed. Vials remain sealed with elastomeric stoppers and aluminum crimps until use, because airborne moisture can raise residual water and shorten shelf life. The porous cake is fragile and may crack, shrink, or powder during transport. Personnel typically avoid repeated warming and cooling of sealed units, which can draw moisture through closures. These practices aim to preserve the low water content achieved during drying.
After lyophilization, the dried product is often sealed under vacuum or an inert gas to limit moisture and oxygen exposure. Vials, stoppers, and seals must maintain their barrier throughout shelf life. Storage temperature depends on product sensitivity: some cakes tolerate controlled room temperature, while labile biologics require refrigeration. Humidity is a critical variable because dried cakes are hygroscopic and can absorb water when exposed to air. Handling procedures therefore limit open-vial time and use desiccated environments for sampling.
Quality control for lyophilized materials examines appearance, reconstitution time, residual moisture, and mechanical integrity. An acceptable cake is usually uniform and porous, though appearance alone does not prove stability. Karl Fischer titration is a common method for water content, while differential scanning calorimetry can reveal glass transition events. Stability studies track potency, aggregation, and moisture over time under defined temperature and humidity conditions. Specifications are product-specific and may include sterility and endotoxin tests for sterile preparations.
Normally pathogenic bacteria are weakened so they are no longer pathogenic. Commensal or food-grade bacteria which are not pathogenic. Using bacterial surface display of antigens is a valuable alternative to conventional vaccine design for various reasons, one of them being that the proteins expressed on the bacterial cell surface can act favourably as an adjuvant. Conventional vaccines require the addition of adjuvants. Another advantage of generating vaccines using bacterial display systems is that the whole bacterial cell can be incorporated in the live vaccine Unlike bacteriophage display systems which are generally used in vaccine development to find unknown epitopes, bacterial display systems are used to express known epitopes and the cells act as a vaccine delivery system. Under similar conditions, selection of bacterial-displayed peptides to model protein streptavidin proved worse.
After a vascular injury occurs, platelets are activated by locally exposed collagen (glycoprotein (GP) VI receptor), locally generated thrombin (PAR1 and PAR4 receptors), platelet-derived thromboxane A2 (TxA2) (TP receptor) and ADP (P2Y1 and P2Y12 receptors) that is either released from damaged cells or secreted from platelet dense granules. The von Willebrand factor (VWF) serves as an essential accessory molecule. In general terms, platelet activation initiated by agonist takes to a signaling cascade that leads to an increase of the cytosolic calcium concentration. Consequently, the integrin αIIbβ3 is activated and the binding to fibrinogen allows the aggregation of platelets to each other. The increase of cytosolic calcium also leads to shape change and TxA2 synthesis, leading to signal amplification.
Prolactin is available commercially for use in other animals, but not in humans. It is used to stimulate lactation in animals. The biological half-life of prolactin in humans is around 15–20 minutes. The D2 receptor is involved in the regulation of prolactin secretion, and agonists of the receptor such as bromocriptine and cabergoline decrease prolactin levels while antagonists of the receptor such as domperidone, metoclopramide, haloperidol, risperidone, and sulpiride increase prolactin levels. D2 receptor antagonists like domperidone, metoclopramide, and sulpiride are used as galactogogues to increase prolactin secretion in the pituitary gland and induce lactation in humans. Breast-feeding Breastfeeding and fertility Epileptic seizure Hyperprolactinaemia Hypothalamic–pituitary–prolactin axis Male lactation Prolactin modulator Prolactin receptor Prolactin-releasing hormone Prolactinoma Weaning MedlinePlus Encyclopedia: Prolactin Overview of all the structural information available in the PDB for UniProt: P01236 (Prolactin) at the PDBe-KB.
In the presence of a full agonist exerting its maximal effect, a partial agonist can behave like a competitive antagonist to lower the effect of receptor binding, generating merely a submaximal reaction. These variations can be evaluated regarding effectiveness, indicating the agonist-receptor complex's "strength" in causing a tissue response. It relies on receptor occupancy and response. A particular medication of intermediate efficacy may appear as a partial agonist in one tissue (lower level of receptor expression) and a full agonist in another (high level of receptor expression) across distinct cell types expressing the same receptor but at varying densities.
Topical nonsteroidal anti-inflammatory drugs provide pain relief in common conditions such as muscle sprains and overuse injuries. Since the side effects are also lesser, topical preparations could be preferred over oral medications in these conditions. Some novel and investigational analgesics include subtype-selective voltage-gated sodium channel blockers such as funapide and raxatrigine, as well as multimodal agents such as ralfinamide. Audioanalgesia Electroanalgesia Pain management Patient-controlled analgesia Pain in babies Congenital analgesia (insensitivity to pain)
Sources: en.wikipedia.org
Arabinogalactan-proteins (AGPs) are highly glycosylated proteins (glycoproteins) found in the cell walls of plants. Each one consists of a protein with sugar molecules attached (which can account for more than 90% of the total mass). They are members of the wider class of hydroxyproline (Hyp)-rich cell wall glycoproteins, a large and diverse group of glycosylated wall proteins. AGPs have been reported in a wide range of higher plants in seeds, roots, stems, leaves and inflorescences. AGPs account for only a small portion of the cell wall, usually no more than 1% of dry mass of the primary wall. They have also been reported in secretions of cell culture medium of root, leaf, endosperm and embryo tissues, and some exudate producing cell types such as stylar canal cells are capable of producing lavish amounts of AGPs. They are implicated in various aspects of plant growth and development, including root elongation, somatic embryogenesis, hormone responses, xylem differentiation, pollen tube growth and guidance, programmed cell death, cell expansion, salt tolerance, host-pathogen interactions, and cellular signaling. AGPs have attracted considerable attention due to their highly complex structures and potential roles in signalling. In addition, they have industrial and health applications due to their chemical/physical properties (water-holding, adhesion and emulsification).
BIA Separations was formed in 1998 by a group of scientists in Ljubljana, Slovenia to commercialize a new chromatographic resin based on monolith technology. Monolithic resin was developed independently by three different laboratories in late 1980s led by Hjertén, Švec and Tennikova. The company was one of the few Slovenian companies to receive venture capital funding at that time-Horizonte Venture Management realizing the potential of monoliths made the initial investment in the company. During that year, BIA Separations released its first commercial product marketed under the trade name of CIM (Convective Interaction Media). The new technique was named HPMC (High Performance Monolith Chromatography). During the 1999 and 2000s, the company promoted this new platform technology to the scientific and business community and registered several patents. In 2007 the company headquarters moved to Villach, Austria. In 2011 BIA Separations entered a strategic partnership with Japan Synthetic Rubber Corporation, a Japanese company producing synthetic materials. A strategic partnership agreement with Showa Denko K.K. (SDK) was signed in 2012.
Unk is sometimes used instead of Xaa, but is less standard. Ter or * (from termination) is used in notation for mutations in proteins when a stop codon occurs. It corresponds to no amino acid at all. In addition, many nonstandard amino acids have a specific code. For example, several peptide drugs, such as Bortezomib and MG132, are artificially synthesized and retain their protecting groups, which have specific codes. Bortezomib is Pyz–Phe–boroLeu, and MG132 is Z–Leu–Leu–Leu–al. To aid in the analysis of protein structure, photo-reactive amino acid analogs are available. These include photoleucine (pLeu) and photomethionine (pMet).
2,4,6-Triisopropylbenzenesulfonyl azide (trisyl azide) is an organic chemical used as a reagent to supply azide for electrophilic amination reactions, such as for the asymmetric synthesis of unnatural amino acids. Introduction of an azide on the α carbon of carboxylic acid derivatives using trisyl azide is an efficient alternative to electrophilic halogenation followed by nucleophilic substitution using anionic azide. Using an oxazolidinone as chiral auxiliary typically gives good induction of the stereochemistry at the α position. Subsequent reduction converts the α-azide to an α-amine.
Automated synthesis systems are laboratory robots that combine of software and hardware. As synthesis is a linear combination of steps, the individual steps can be modularized into hardware that accomplishes the specific step (mixing, heating or cooling, product analysis, etc.). Such hardware includes robotic arms that use dispensers and grippers to transfer materials and shakers that adjust the stirring speed and cartesian coordinate system robots that operate on a X Y Z axis and can move items and perform synthesis within designated bounds. Conditions of reactions (atmosphere, temperature, pressure) are controlled with the help of peripherals like: gas cylinders, vacuum pump, reflux system and cryostat. Modular platforms use a variety of tools in order to perform all the unit operations needed in synthesis. There are many commercial modular hardware solutions available to execute synthesis. New software programs are available that can compile an automated synthesis procedure in executable code directly from existing literature. There are also software programs that can retro-synthetically generate a procedure at the level of proficiency of a graduate student.
Sources: en.wikipedia.org
When multiple copies of a polypeptide encoded by a gene form an aggregate, this protein structure is referred to as a multimer. When a multimer is formed from polypeptides produced by two different mutant alleles of a particular gene, the mixed multimer may exhibit greater functional activity than the unmixed multimers formed by each of the mutants alone. In such a case, the phenomenon is referred to as intragenic complementation. E. coli alkaline phosphatase, a dimer enzyme, exhibits intragenic complementation. By changing the amino acids of the wild-type alkaline phosphatase enzyme produced by Escherichia coli, a mutant alkaline phosphatase is created which not only has a 36-fold increase in enzyme activity, but also retains thermal stability. Typical uses in the lab for alkaline phosphatases include removing phosphate monoesters to prevent self-ligation, which is undesirable during plasmid DNA cloning. Common alkaline phosphatases used in research include:
Prolactin receptors are present in the mammillary glands, ovaries, pituitary glands, heart, lung, thymus, spleen, liver, pancreas, kidney, adrenal gland, uterus, skeletal muscle, skin and areas of the central nervous system. When prolactin binds to the receptor, it causes it to dimerize with another prolactin receptor. This results in the activation of Janus kinase 2, a tyrosine kinase that initiates the JAK-STAT pathway. Activation also results in the activation of mitogen-activated protein kinases and Src kinase. Human prolactin receptors are insensitive to mouse prolactin. Prolactin levels may be checked as part of a sex hormone workup, as elevated prolactin secretion can suppress the secretion of follicle stimulating hormone and gonadotropin-releasing hormone, leading to hypogonadism and sometimes causing erectile dysfunction. Prolactin levels may be of some use in distinguishing epileptic seizures from psychogenic non-epileptic seizures. The serum prolactin level usually rises following an epileptic seizure.
Förster resonance energy transfer (FRET)-based Cl indicators consist of two fluorescent proteins, Cyan fluorescent protein (CFP) and YFP connected via a polypeptide linker. This allows ratiometric Cl− measurements based on the Cl− sensitivity of YFP and Cl− insensivity of CFP. Clomeleon and Cl− Sensor are FRET-based Cl indicators that allow ratiometric non-invasive monitoring of chloride activity in living cells.
Cardiac alpha actin is a 42.0 kDa protein composed of 377 amino acids. Cardiac alpha actin is a filamentous protein extending from a complex mesh with cardiac alpha-actinin (ACTN2) at Z-lines towards the center of the sarcomere. Polymerization of globular actin (G-actin) leads to a structural filament (F-actin) in the form of a two-stranded helix. Each actin can bind to four others. The atomic structure of monomeric actin was solved by Kabsch et al., and closely thereafter this same group published the structure of the actin filament. Actins are highly conserved proteins; the alpha actins are found in muscle tissues and are a major constituent of the contractile apparatus. Cardiac (ACTC1) and skeletal (ACTA1) alpha actins differ by only four amino acids (Asp4Glu, Glu5Asp, Leu301Met, Ser360Thr; cardiac/skeletal). The actin monomer has two asymmetric domains; the larger inner domain comprised by sub-domains 3 and 4, and the smaller outer domain by sub-domains 1 and 2. Both the amino and carboxy-termini lie in sub-domain 1 of the outer domain.
Sources: en.wikipedia.org
Most lyophilized products are stored in sealed containers at controlled temperature and humidity. Some require refrigeration, while others are stable at room temperature. Protection from light and moisture is often necessary.
Cake collapse indicates that the porous structure was lost during drying. It can result from excessive product temperature or an unsuitable formulation. Collapsed cakes may have slower reconstitution and are often rejected by visual inspection.
Residual moisture affects the chemical and physical stability of a lyophilized solid. High moisture can promote degradation, aggregation, or cake shrinkage. The acceptable range is set for each product based on stability data.
Residual moisture can influence chemical degradation, cake collapse, and long-term stability. Low moisture levels usually improve stability, but each product has an optimal range.